Factory making Low Voltage Light Sockets - Definite Purpose Contactor 1P 20-40 FLA – Simply Buy Detail:
Mechanical Data
20, 25, 30 FLA Models
Type: #10-32 Screw with quad 0.250” (6.35 mm) quick connects.
Wire Size: 16-8 AWG (Stranding must be split for 8 AWG wire.)
Tightening Torque: 25 in.-lbs.
NOTE: Contactors with terminals of two-piece design are shipped
with terminal screws left “up” to facilitate customer wiring. The
customer must tighten the screws to the specified torque to
achieve a good electrical connection.
40 FLA Models
Type: Box Lug with dual 0.250” (6.35 mm) quick connects.
Wire Size: 14-4 Cu/Al AWG
Tightening Torque: 40 in.-lbs.
Coil Termination: Dual 0.250” (6.35 mm) quick connects.
Arc Cover: Optional on 20-30 FLA models, standard on 40 FLA models.
Weight: One Pole Types: 8 oz. (227 g) approximately.
Two Pole Types: 9.6 oz. (273 g) approximately
Product detail pictures:





Related Product Guide:
Nvidia unveils Turing architecture and GPUs with dedicated ray-tracing hardware | 25 Amp Circuit Breaker
Motor Nameplate Current vs. NEC Full Load Current Values | National Electrical Code | 220v Contactor Relay
Adhering into the principle of "quality, provider, performance and growth", we now have gained trusts and praises from domestic and intercontinental consumer for Factory making Low Voltage Light Sockets - Definite Purpose Contactor 1P 20-40 FLA – Simply Buy, The product will supply to all over the world, such as: Lesotho , Puerto Rico , kazan , We have more than 100 works in the plant, and we also have a 15 guys work team to service our customers for before and after sales. Good quality is the key factor for the company to stand out from other competitors. Seeing is Believing, want more information? Just trial on its products!
In China, we have purchased many times, this time is the most successful and most satisfactory, a sincere and realiable Chinese manufacturer!






